https://www.aloktools.com Tools Manufacturer Fri, 28 Feb 2025 06:55:19 +0000 en hourly 1 https://wordpress.org/?v=6.6.5 https://www.aloktools.com/wp-content/uploads/2026/05/cropped-icon-32x32.png https://www.aloktools.com 32 32 https://www.aloktools.com/product/quadruple-v-blocks/ Wed, 15 Feb 2017 11:20:05 +0000 http://aloktools.com/product/quadruple-v-blocks/ Product Description

• Made from seasoned closed grained cast iron
• Universal V-Block consisting of four different size grooves
• Supplied in pairs

Technical Description

• Parallelism tolerance of Vee Axis to base per 6” length within 30 microns
• Squareness tolerance of Vee Axis to end faces within 25 microns

]]> Product Description

• Made from seasoned closed grained cast iron
• Universal V-Block consisting of four different size grooves
• Supplied in pairs

Technical Description

• Parallelism tolerance of Vee Axis to base per 6” length within 30 microns
• Squareness tolerance of Vee Axis to end faces within 25 microns

]]> https://www.aloktools.com/product/casted-v-blocks/ Wed, 15 Feb 2017 09:03:25 +0000 http://aloktools.com/product/casted-v-blocks/ Product Description

• Made of high quality seasoned castings
• Blocks are accurately ground square and parallel
• Supplied in matched and numbered pairs

Technical Description

• Parallelism tolerance of Vee Axis to base per 6” length within 30 microns
• Squareness tolerance of Vee Axis to end faces within 25 microns

]]> Product Description

• Made of high quality seasoned castings
• Blocks are accurately ground square and parallel
• Supplied in matched and numbered pairs

Technical Description

• Parallelism tolerance of Vee Axis to base per 6” length within 30 microns
• Squareness tolerance of Vee Axis to end faces within 25 microns

]]> https://www.aloktools.com/product/precision-v-block-and-clamp-set-3/ Tue, 14 Feb 2017 12:06:40 +0000 http://aloktools.com/product/precision-v-block-and-clamp-set-3/

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]>

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]> https://www.aloktools.com/product/precision-v-block-and-clamp-set-2/ Tue, 14 Feb 2017 09:57:29 +0000 http://aloktools.com/product/precision-v-block-and-clamp-set-2/

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]>

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]> https://www.aloktools.com/product/magnetic-v-block-dual-vee/ Fri, 23 Dec 2016 08:25:29 +0000 http://aloktools.com/?post_type=product&p=4347

All working surfaces are precision ground

Ideal for holding, inspection and light machining

A powerful, permanent magnet is controlled by rotary ON/OFF switch

Supplied in fine finished wooden box

Technical Description

• Parallelism tolerance of Vee Axis to base within .0004”/10 microns

]]>

All working surfaces are precision ground

Ideal for holding, inspection and light machining

A powerful, permanent magnet is controlled by rotary ON/OFF switch

Supplied in fine finished wooden box

Technical Description

• Parallelism tolerance of Vee Axis to base within .0004”/10 microns

]]> https://www.aloktools.com/product/precision-v-block-and-clamp-set-multi-use/ Fri, 23 Dec 2016 08:04:27 +0000 http://aloktools.com/?post_type=product&p=4344

Multi-Use : holds both square and round work

Stepped groove construction permits both low and high clamping

Side hole-provided in each block to facilitate clamping

Made of hardened tool steel, machined and ground in pairs

Supplied in ‘pairs’ with two clamps

Capacity : 2” (50 mm) round and 1-7/16” (36.5 mm) square

]]>

Multi-Use : holds both square and round work

Stepped groove construction permits both low and high clamping

Side hole-provided in each block to facilitate clamping

Made of hardened tool steel, machined and ground in pairs

Supplied in ‘pairs’ with two clamps

Capacity : 2” (50 mm) round and 1-7/16” (36.5 mm) square

]]> https://www.aloktools.com/product/precision-v-block-and-clamp-all-angle/ Fri, 23 Dec 2016 07:58:28 +0000 http://aloktools.com/?post_type=product&p=4341

Ultimate V-Block for grinding, milling or drilling work

Made of hardened and precision ground tool steel

The sides are parallel and vee is central and ground

Central hole is provided for drilling or removing pins

Clamp is smaller than outside width of the V-Block and has adjustable side screw for support

V-Block has four 3/8-16 tapped holes two in the base and one on each side for angle Iron clamping

Block is provided with black oxidized clamp

Technical Description

• Parallelism tolerance of Vee Axis to base within microns.

]]>

Ultimate V-Block for grinding, milling or drilling work

Made of hardened and precision ground tool steel

The sides are parallel and vee is central and ground

Central hole is provided for drilling or removing pins

Clamp is smaller than outside width of the V-Block and has adjustable side screw for support

V-Block has four 3/8-16 tapped holes two in the base and one on each side for angle Iron clamping

Block is provided with black oxidized clamp

Technical Description

• Parallelism tolerance of Vee Axis to base within microns.

]]> https://www.aloktools.com/product/precision-v-block-and-clamp-set/ Thu, 15 Dec 2016 06:09:18 +0000 http://aloktools.com/?post_type=product&p=4111

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]>

All sides are ground square and parallel to each other

V’s are central, parallel and square and are matched in pairs

Made of properly heat treated and hardened tool steel

Precision made for machinist’s and tool-makers use

AVB 0538 & 39 are sturdy V-Blocks designed so that clamps do not protrude over the sides

Supplied in pairs with two clamps

Replacement clamps include pair of clamps and bolts

Technical Description Parallelism Accuracy as per BS 3731/DIN 2274 Grade 2]]>